Industry Training Models are recommended for industrial training, design and simulation. Because of it's unlimited usability, fischertechnik is superbly suited for simulation and training in industrial applications. Very often industry models are built to plan plants and machines, eg. assembly belts, before the "real" ones are bought, so you are able to detect and solve problems in advance. fischertechnik can be used to simulate very complex factory automation projects; this makes planning the real plant much easier and will save money. While any fischertechnik product can be used for industrial training, design and simulation, the following models may be modified to design and simulate most plants.
Construction set ROBO conveyor belt 24V without ROBO interface - (without #93293) Length 275 mm, transports work pieces with a diameter of up to 29 mm. Several conveyor belts can be connected to each other to form a conveyor belt of any length.
Scope of Delivery - 1 DC motor, 1 sensing device (potential-free), choice as pulse counter, can be used for distance traveled or as an activation button; 2 light barriers consisting of phototransistor and lens tip bulb, which can be connected together to an output for the control or directly to the power supply. 1 work piece diameter 29 mm, h = 25 mm.
3 digital inputs - 1 output, 9 V /24 V (1 motor for drive for conveyor belt)
Training model conveyor belt 9 V with ROBO interface- (fully wired with #93293) Length 275 mm, transports work pieces with a diameter of up to 29 mm. Several conveyor belts can be connected to each other to form a conveyor belt of any length.
Scope of Delivery - 1 DC motor, 1 sensing device (potential-free), choice as pulse counter, can be used for distance traveled or as an activation button; 2 light barriers consisting of phototransistor and lens tip bulb, which can be connected together to an output for the control or directly to the power supply. 1 work piece diameter 29 mm, h = 25 mm.
3 digital inputs - 1 output, 9 V /24 V (1 motor for drive for conveyor belt)
2 DC motors, 2 limit switches, floating, 2 light barriers, each comprising a phototransistor and a lens lamp.Model mounted on fischertechnik base plate. Size (l/w/h) 280x215x185mm. Packed in cardboard.
With magazine for work pieces, rotary table, processing station, conveyor belt for transporting work pieces, and model compressor. Contains two double acting and one single acting cylinder, 5 x 3/2 solenoid valves, 2 DC motors, 4 proximity sensors
2 machining stations, 4 conveyor belts arranged in U-shape, 8 DC motors, 4 limit switches (floating), 5 light barriers each comprising a phototransistor and one lens lamp, model mounted on sturdy wooden panel. Packed in wooden box. Model available in 9VDC or 24VDC versions.
Standard scope of supply: No controller, interface: 1 ribbon cable, 16-conductor, colour-coded with 16-pin male connector, 1 ribbon cable, 18-conductor, colour-coded with 20-pin male connector (illustrated with fischertechnik.
A new high tech 3 axis robot with grabber claw, 4 DC motors operating with either 9V or 24V, 4 limit switches, 4 pulse counters for travel measurement, all counters are zero potential. Axis one 180 Click in image to enlarge degrees of rotation, Axis 2:100 mm back and forth; Axis 3 160 mm raise/lower.
A new high tech 3 axis robot with grabber claw, 4 DC motors operating with either 9V or 24V, 4 limit switches, 4 pulse counters for travel measurement, all counters are zero potential. Axis one 180 Click in image to enlarge degrees of rotation, Axis 2:100 mm back and forth; Axis 3 160 mm raise/lower.
2 DC motors, 2 limit switches, floating, 2 light barriers, each comprising a phototransistor and a lens lamp. Model mounted on fischertechnik base plate. Packed in cardboard. Model available in 9VDC or 24VDC versions.
Standard scope of supply: No controller, interface: 1 ribbon cable, 14-conductor, colour-coded with 14-pin male connector (illustrated with fischertechnik "Intelligent Interface", Art. No. 30402, also available for 9V version). Model is ideally combinable with "3-D Robot", Art. No. 16286.
2 machining stations, 4 conveyor belts arranged in U-shape, 8 DC motors, 4 limit switches (floating), 5 light barriers each comprising a phototransistor and one lens lamp, model mounted on sturdy wooden panel. Packed in wooden box. Model available in 9VDC or 24VDC versions.
Standard scope of supply: No controller, interface: 1 ribbon cable, 16-conductor, colour-coded with 16-pin male connector, 1 ribbon cable, 18-conductor, colour-coded with 20-pin male connector (illustrated with fischertechnik "Intelligent Interface", Art. No. 30402 and "Extension Module", Art. No. 16554, also available for 9V version). Model is ideally combinable with "3-D Robot", Art. No. 16286.
